Click for zoom

SKU: 803.001.0048

WeEnBT 169D.112

BT169DH Sensitive Gate SCR Thyristor 400V 0.8A TO-92 WeEn
To see purchase prices you must be a registered user!
Indicative retail price (incl. 24% VAT): 0,17 €

BT169DH 400V / 0.8A Sensitive Gate SCR thyristor from WeEn Semiconductors in a TO-92 / SOT54 package, suitable for low-power applications, general switching and phase-control circuits. Its very low Gate trigger current allows interfacing with microcontrollers, logic ICs and other low-power control circuits.

Technical description

BT169DH is the device marking for the WeEn BT169D type. It is a planar passivated Silicon Controlled Rectifier rated for a maximum repetitive off-state and reverse voltage of 400V.

Maximum average on-state current IT(AV) is 0.5A and maximum RMS on-state current IT(RMS) is 0.8A. Maximum Gate trigger current IGT is only 0.2mA, making the device suitable for low-power logic drive applications.

Non-repetitive surge current ITSM reaches 8A for a 10ms pulse and 9A for 8.3ms. The device is supplied in a plastic TO-92 / SOT54 through-hole package.

Typical applications

Suitable for general switching, phase control, low-power circuits, electronic switches, microcontroller or logic IC triggering and electronic equipment repair requiring a 400V sensitive-gate SCR.

Compatibility note

Before replacement, verify VDRM/VRRM voltage, IT(AV) and IT(RMS) current ratings, very low Gate trigger current, pinout and TO-92 package. BT169DH is the marking for BT169D and should not be confused with BT169B, BT169G or BT169H voltage variants.

Frequently asked questions

What is the BT169DH?
It is the marking code for the BT169D, a Sensitive Gate Silicon Controlled Rectifier from WeEn Semiconductors.

What is the maximum voltage rating?
The maximum repetitive VDRM/VRRM voltage is 400V.

How much current can it handle?
Maximum average on-state current is 0.5A and maximum RMS on-state current is 0.8A.

What Gate trigger current does it require?
Maximum Gate trigger current IGT is 0.2mA.

Can it be driven by a microcontroller?
Yes. WeEn specifies it for interfacing with microcontrollers, logic ICs and other low-power gate trigger circuits when used with a suitable circuit design.

What is the BT169DH pinout?
Pin 1 is Anode, Pin 2 is Gate and Pin 3 is Cathode.



Package weight: 0,001kg
Package volumetric: 0,001kg
ManufacturerWeEn Semiconductors
TypeBT169D
MarkingBT169DH
Device typeSensitive Gate SCR / Thyristor
VDRM/VRRM voltage400V
Average on-state current IT(AV)0.5A
RMS on-state current IT(RMS)0.8A
Maximum Gate trigger current IGT0.2mA
Surge current ITSM8A at 10ms
Surge current ITSM9A at 8.3ms
Static dV/dt500V/us min.
Maximum junction temperature125°C
PackageTO-92 / SOT54
Mounting typeThrough Hole / THT
Pin 1Anode
Pin 2Gate
Pin 3Cathode
Warranty / repair terms
UserID/Email:
Password: