WeEnBT 169B.126
BT169B,126 200V / 0.8A Sensitive Gate SCR thyristor from WeEn Semiconductors in a TO-92 / SOT54 package, designed for low-power applications and direct interfacing with microcontrollers, logic ICs and other low-current gate trigger circuits.
Technical description
The BT169B is a planar passivated Silicon Controlled Rectifier rated for a maximum repetitive off-state voltage VDRM/VRRM of 200V. Maximum average on-state current IT(AV) is 0.5A, while maximum RMS on-state current IT(RMS) is 0.8A.
Its highly sensitive gate allows triggering with a maximum Gate trigger current IGT of only 0.2mA. Maximum holding current IH is 5mA, while non-repetitive surge current ITSM reaches 8A for 20ms and 9A for 16.7ms.
The device is supplied in a plastic TO-92 / SOT54 through-hole package. The full WeEn orderable part number is BT169B,126, while the device marking is BT169B.
Typical applications
Suitable for low-power control circuits, microcontroller or logic IC triggering, electronic switches, protection circuits, small controlled loads and other applications requiring an SCR with a highly sensitive gate.
Compatibility note
Before replacement, verify VDRM/VRRM voltage, IT(AV) and IT(RMS) current ratings, very low Gate trigger current, pinout and TO-92 package. The BT169B is an SCR and should not be replaced by a TRIAC or another thyristor type without checking circuit requirements.
Frequently asked questions
What is the BT169B,126?
It is a Sensitive Gate Silicon Controlled Rectifier (SCR) from WeEn Semiconductors for low-power applications.
What is the maximum voltage rating?
The maximum repetitive VDRM/VRRM voltage is 200V.
How much current can it handle?
Maximum average on-state current is 0.5A and maximum RMS on-state current is 0.8A.
What Gate trigger current does it require?
Maximum Gate trigger current IGT is only 0.2mA, making it suitable for low-power drive circuits.
Can it be driven by a microcontroller?
Yes. WeEn specifies that it is designed for interfacing with microcontrollers, logic ICs and other low-power gate trigger circuits, using an appropriate circuit design.
What is the BT169B pinout?
Pin 1 is Anode, Pin 2 is Gate and Pin 3 is Cathode.
Package weight: 0,001kg
Package volumetric: 0,001kg

IL 4218-X006
IL 4218-X006 Triac & SCR output optocouplers phototriac output low input current

TYN 1012
TYN 1012 Thyristor 12A, 1000V, TO220

ST 180S16POV
ST180S16P0V Phase Control Thyristor SCR 1600V 200A Stud TO-93

BT 138/800
BT 138/800 Τράιακ 500V 12A to 2

BT 152-600R
BT152-600R SCR Thyristor 650V 20A TO-220AB NXP
EL
EN



