WeEnBT 151-800R
BT151-800R 800V / 12A SCR thyristor from WeEn Semiconductors in a TO-220AB package, designed for power switching and control applications. It provides high blocking-voltage capability, high surge-current capability and good thermal-cycling performance.
Technical description
The BT151-800R is a planar passivated Silicon Controlled Rectifier with a maximum repetitive peak off-state voltage VDRM of 800V and repetitive peak reverse voltage VRRM of 800V. Maximum RMS on-state current IT(RMS) is 12A, while maximum average on-state current IT(AV) is 7.5A.
Maximum Gate trigger current IGT is 15mA and maximum Gate trigger voltage VGT is 1.5V. Holding current IH is up to 20mA. Non-repetitive surge current ITSM reaches 120A for a 10ms pulse and 132A for 8.3ms.
The device is supplied in a TO-220AB / SOT78 plastic through-hole package. The mounting base is electrically connected to the anode.
Typical applications
Suitable for ignition circuits, motor control, protection circuits, voltage regulation, controlled rectifiers and other power-switching applications requiring a high-voltage SCR.
Compatibility note
Before replacement, verify VDRM/VRRM voltage, IT(RMS) and IT(AV) current ratings, Gate trigger current, pinout, package and thermal requirements. The BT151-800R is an SCR and is not a direct substitute for a TRIAC or other thyristor type without checking the circuit requirements.
Frequently asked questions
What is the BT151-800R?
It is a Silicon Controlled Rectifier (SCR) power thyristor manufactured by WeEn Semiconductors.
What is the maximum voltage rating?
Maximum repetitive VDRM and VRRM voltage is 800V.
How much current can it handle?
Maximum RMS on-state current is 12A and maximum average on-state current is 7.5A under the specified thermal conditions.
What Gate trigger current does it require?
Maximum Gate trigger current IGT is 15mA.
Is the BT151-800R a TRIAC?
No. It is an SCR, a unidirectional controlled thyristor.
What is the pinout?
Pin 1 is Cathode, Pin 2 is Anode and Pin 3 is Gate. The TO-220AB mounting base is also connected to the Anode.
Package weight: 0,001kg
Package volumetric: 0,001kg
EL
EN







