STMicroelectronicsBTA 06-400B
BTA04-600A 4A / 600V TRIAC from STMicroelectronics with a sensitive gate and insulated TO-220AB package, designed for general-purpose AC switching applications. It is suitable for phase control and static switching, with a maximum Gate trigger current of 10mA.
Technical description
The BTA04-600A is a four-quadrant TRIAC for AC applications, rated for 4A RMS on-state current and 600V repetitive peak off-state voltage. Its sensitive Gate allows triggering with low Gate current, while the BTA version features an electrically insulated mounting tab.
Maximum Gate trigger current IGT is 10mA and holding current IH is up to 15mA. The BTA family provides an insulated tab rated at 2500V RMS, allowing electrical isolation from the heatsink when installed according to the manufacturer's requirements.
Typical applications
Suitable for light dimmers, AC power control, static switching, electronic switches, small motor control, heating loads and electronic equipment repair requiring a sensitive-gate 4A / 600V TRIAC.
Compatibility note
Before replacement, verify VDRM/VRRM voltage, RMS current, Gate sensitivity, pinout, package and thermal requirements. Not all 4A / 600V TRIACs are directly interchangeable because Gate current and tab insulation may differ.
Frequently asked questions
What is the BTA04-600A?
It is an STMicroelectronics TRIAC for switching and controlling AC loads, rated at 4A and 600V.
What is the maximum current rating?
The RMS on-state current IT(RMS) is 4A under the specified thermal conditions.
What is the maximum voltage rating?
The repetitive peak off-state voltage VDRM/VRRM is 600V.
Is it a sensitive-gate TRIAC?
Yes. The BTA04-600A has a maximum Gate trigger current IGT of 10mA.
Is the mounting tab insulated?
Yes. The BTA family uses an insulated tab rated at 2500V RMS.
Can it be used in a light dimmer?
Yes. STMicroelectronics specifies the family for phase-control and static-switching applications.
Package weight: 0,001kg
Package volumetric: 0,001kg
EL
EN










