OEMSAT-100
SAT-100 portable satellite signal finder for aligning and adjusting satellite dishes. It operates over the 950-2050MHz frequency range and allows quick monitoring of received signal level while the dish is being pointed toward the required satellite.
Technical description
The SAT-100 is an analog Satellite Finder designed for satellite dish installation and alignment. Its operating frequency range is 950-2050MHz and the specified input signal level range is -25dBm to -75dBm.
The specified LNB gain range is -52dB to -60dB. The meter is connected between the LNB and satellite receiver, allowing the installer to monitor relative signal strength while adjusting the dish position.
Typical applications
Suitable for initial satellite dish installation, dish realignment, LNB direction checking and quickly locating the position that provides the highest satellite signal level.
Compatibility note
The SAT-100 is a basic analog relative signal-level meter and does not replace a professional digital field meter or spectrum analyzer. Accurate satellite identification and measurements such as BER, MER or C/N require dedicated digital test equipment.
Frequently asked questions
What is the SAT-100?
It is a portable Satellite Finder used to locate and adjust satellite signals during satellite dish installation.
What frequency range does it cover?
It operates over the 950-2050MHz frequency range.
What signal level range does it measure?
The specified input signal level range is -25dBm to -75dBm.
Where is the SAT-100 connected?
It is connected in-line between the satellite dish LNB and the satellite receiver.
Can it identify which satellite is being received?
No. It indicates relative signal strength for alignment. Satellite identification must be performed using the receiver or a professional digital field meter.
Is it suitable for initial dish installation?
Yes. It is suitable for quick initial setup and fine adjustment of a satellite dish.
Package weight: 0,100kg
Package volumetric: 0,050kg
EL
EN


