OEMMTP-EXT85

The OEM MTP-EXT85 is a 2-piece multimeter probe tip extender set, approximately 85mm long, designed for accessing narrow, recessed or difficult-to-reach test points.

Technical description

The set includes one red and one black extender designed to fit over the tip of a compatible multimeter probe. The thin metal needle extends the measurement point and provides access to small terminals, connectors, terminal blocks, sockets, PCB test points and other locations that are difficult to reach with a standard probe. Overall length is approximately 85mm, the projecting probe section is approximately 35-36mm and the exposed metal section is approximately 30mm.

Typical applications

Suitable for electronics servicing, laboratory measurements, PCB troubleshooting, automotive diagnostics, connector testing, terminal blocks and general electrical or electronic measurements requiring a long-reach probe tip.

Compatibility note

The rear probe opening is approximately 9mm and is intended to fit over a compatible multimeter probe. Mechanical fit should be verified before purchase. No specific CAT rating, maximum voltage or maximum current should be assumed unless such ratings are explicitly documented for the exact product.

Frequently asked questions

What is a probe tip extender used for?
It allows a multimeter probe to reach narrow, recessed or small electrical contacts that are difficult to access with a standard probe.

What is the overall length?
Approximately 85mm per probe extender.

What is included in the set?
One red and one black probe tip extender.