NedisASWI2602BK

The Nedis ASWI2602BK is a manual speaker output selector for connecting up to two pairs of passive speakers to one stereo amplifier. It supports 4-16Ω speakers, a maximum load of 150W RMS per channel and allows either one or both speaker pairs to be selected independently.

Technical description

The ASWI2602BK provides one stereo amplifier input and two stereo outputs for two speaker pairs. Connections are made through spring-loaded speaker terminals and selection is controlled by two independent ON/OFF rocker switches. Supported speaker impedance is 4-16Ω and maximum load is 150W RMS per channel. Loudspeaker cable up to 2.5mm² cross-section and up to 50m length can be used. Unit dimensions are approximately 130x80x38mm.

Typical applications

Suitable for home and professional stereo systems where one amplifier needs to drive two different speaker pairs, such as two rooms, two listening zones or alternative speaker positions.

Compatibility note

Before use, verify that the connected speakers and amplifier operate within the permitted impedance limits. When both speaker pairs are enabled simultaneously, the total impedance presented to the amplifier must remain within the amplifier specification.

Frequently asked questions

How many speaker pairs can be connected?
Up to two pairs of passive speakers can be connected to one stereo amplifier.

Can both speaker pairs operate at the same time?
Yes. Each pair has its own ON/OFF switch and both pairs may be selected simultaneously.

Which speaker impedance is supported?
The supported impedance range is 4-16Ω.