OEMOLED Display 0.96" I2C/IIC Blue

OLED Display 0.96" I2C/IIC Blue 128?64 with SSD1306, suitable for Arduino, ESP32, ESP8266, Raspberry Pi, STM32 and electronic projects requiring a compact low-power display.

The OLED Display 0.96" I2C/IIC Blue is a small monochrome OLED display module with blue pixels and 128?64 resolution. It typically uses the SSD1306 controller and communicates via I2C, requiring only SDA and SCL data lines in addition to power. It is ideal for displaying sensor values, system status, menus, simple graphics and measurement data in microcontroller-based applications.

Technical description

The OLED display does not require a backlight, as each pixel is self-emissive. This provides high contrast, clear readability and low power consumption compared with small LCD displays. The I2C interface reduces the number of required microcontroller pins and makes connection simple with development boards such as Arduino UNO, Nano, Mega, ESP32, ESP8266, Raspberry Pi Pico and STM32.

Typical applications

Suitable for Arduino projects, voltage/current meters, thermometers, humidity meters, data loggers, IoT devices, compact measuring instruments, laboratory power supplies, battery chargers, robotics projects, device menus and system status indicators.

Compatibility note

The module is usually compatible with SSD1306 libraries, such as Adafruit SSD1306, U8g2 and similar Arduino IDE libraries. The typical I2C address is 0x3C, but some versions may use 0x3D. Before wiring, verify the pin order, as VCC, GND, SCL and SDA arrangement may vary depending on the module batch.

Weight: 0,02kgVolumetric weight: it depend from package dimensions.